This article will give you some tips if you have ever wondered how a torch can cut through concrete. You can use a hammer, oxyfuel torches, or plasma to break through thick plates. The following are some of the tips. Make sure to read them all! There are some things you need to know about each method before you start cutting concrete like a concrete cutting torch. In this article, I’ll briefly review each of them.
Using a torch to cut through concrete
A gas-cutting torch (oxy-cutting torch) is an option for cutting steel and concrete. It uses regular liquid gasoline and jumps over air gaps, allowing the flame to cut through thick materials. It is also UL-listed and MSHA-permitted, making it a safe option for cutting thick materials. In addition, its flames produce a high-pressure stream that can cut through all types of metals, including steel and concrete.
To get the best results, choose the right tip for the job. For example, torches with acetylene need a specific tip. If you accidentally buy a propane torch tip, you won’t be able to get the desired temperature or be effective at cutting through concrete. To avoid these issues, choose a torch with an oxygen-boosted flame. This type of torch will cut through steel and concrete in four seconds or less and has no temper loss.
Using a hammer to cut through concrete
There are a few different methods of tearing up a slab of concrete. Before starting, make sure you have a good set of gloves. Also, safety goggles will protect you from flying debris. Hammering on concrete will help you break up the material, but you must be careful not to cause further damage. After cutting through a few inches of concrete, you can use a pry bar to pry chunks out of the slab.
The first method involves placing a wide-blade cold chisel in the area where you want to break through the concrete. Then, using a two-pound hammer, hit the chisel repeatedly. After a few whacks, move on to another area. The first pass may take several passes, and the second, third, or fourth will fracture the concrete along the chisel marks.
Using oxyfuel torches
Oxyfuel torches are an effective way to cut through concrete and other materials, but you need to follow some safety precautions while working with them. A liquid fuel torch has two kinds of pressure: oxidizing and neutral. Oxyfuel torches are pressurized and can cut through steel plates up to 13 mm thick. Oxyfuel torches use liquid fuel vapors, four times denser than gas, to produce a high-speed cutting flame.
The cutting torch’s head is similar to a welding torch. The oxygen blast lever and the trigger can help you identify this type of torch. Oxygen reacts with the metal, producing additional heat and oxide that blasts out the cut. The heat continues until the metal is melted or vaporized, known as oxyfuel. The torch heats enough material to start the process but does not burn it.
Using plasma to cut through concrete
Using plasma to cut through concrete structures is a relatively inexpensive and compact method of cutting through concrete. Unlike a traditional plasma torch, which needs special cooling devices to prevent arcs, the apparatus used here allows the maximum temperature of the gas jet to be located near the target structure. The arc heat causes the electrodes to melt and promote thermal cutting. Once the desired thickness is reached, a continuous cycle of the process can be carried out to cut the concrete plate structure.
When a concrete structure needs to be cut through, it’s often the best option. Plasma cutting can be carried out over an extended period, thanks to its efficiency. Plasma cutting can be carried out on a variety of materials, including bulk minerals, firebricks, and other heat-resistant metals. By reducing the melting point of a concrete structure, a continuous stream of metal can be produced.